Reducing the air volume being sent to an oxidizer can save
companies a significant amount of money in operating and capital
equipment costs. The Anguil Rotor Concentrator is designed to
concentrate large volume, low concentration process exhaust into a
much smaller, highly concentrated air stream. The pollutant laden
air is then sent to a thermal or catalytic oxidizer for
destruction; dramatically decreasing the oxidizer size.
Typical applications include but are not limited to large paint
systems, Permanent Total Enclosure (PTE) exhaust and styrene
emissions.
How the Rotor Concentrator Works
The high volume, low concentration airstream passes through a
rotor concentrator wheel where the VOCs are stripped from the air
and adsorbed onto the wheel. The majority (approximately 90% of the
total air volume) of this clean air is then exhausted to
atmosphere. A small portion of the air stream (approximately 10% of
the total air volume) is heated to an elevated temperature to be
used as desorption air. The concentrator wheel rotates
continuously, transporting adsorbed VOCs into a desorption section.
In the desorption section, the organics are desorbed from the
adsorptive media with the low volume heated airstream. This low
volume, high VOC-laden air is then processed by an oxidizer.
The Rotor Concentrator with Oxidizer is often the most cost
effective technology for processing high volume, low concentration
streams. While the capital cost of a system is competitive with
other technologies, the true savings is realized in reduced
operating costs.
Features:
- Completely shop assembled, pre-wired and test prior to
shipment
- Zeolite adsorbent wheel minimizes risk of fires
- Low pressure drop, typically 3"-5" W.C.
- Destruction efficiencies greater than 95%
- Concentration ratios as high as 20:1
- Continuous operation as opposed to a batch type process
- Concentrator wheel, desorption air heat and oxidizer integrated
as a single system, simplifying installation and control
scheme.
Available Options:
- Various Zeolite options to prevent polymerization
- Complete turnkey packages including all utilities and
ductwork
- High-efficiency filter plenums
- Numerous options for source of desorption air heat
- Regenerative Thermal Oxidizers (RTO's), Thermal Recuperative
Oxidizers and Catalytic Recuperative Oxidizers can be supplied to
treat the concentrated stream
- Systems designed to process Halogenated VOC's
- Forced and induced draft arrangements
The Anguil Rotor Concentrator Advantage:
- Regulatory Compliance Guaranteed
- Complete Quality Assurance test prior to shipment
- Engineering experience and flexibility to address a wide range
of process conditions and applications
- Proven system design with numerous installations all over the
world
- Competitive capital equipment costs
- Expedited project schedules are available
Anguil's Cost Effective Design
The rotor concentrator is designed as part of Anguil's broad
line of technologically advanced, yet user-friendly, air pollution
control products. Anguil's experience includes over 30 years of
Regenerative, Recuperative, Catalytic and Direct-Fired oxidizer
manufacturing, ranging in size from 100 to 500,000 SCFM
(150-800,000 Nm3/hr). These oxidizers are used in conjunction with
Scrubbers, Soil Remediation Equipment and Ceramic Filter Systems
for industrial processes. Each product line represents
value-engineered systems with emphasis on cost minimization. All
systems are designed for seamless integration into the process,
optimal performance and trouble-free operation.
Operating Cost Reduction Strategies:
The Anguil philosophy is to provide innovative pollution control
technology including engineering, equipment manufacturing,
installation, startup and post-sale service. Other benefits to
working with Anguil:
- 24 Hour customer service and support
- Multiple technology offerings ensure unbiased
recommendations
- Complete aftermarket sales department
- Over 30 years of oxidizer manufacturing experience