|
|
|
| |
|
Catalytic Oxidizer
The Anguil Catalytic Oxidizer destroys toxic Volatile Organic Compounds (VOCs) that are discharged in industrial process exhausts. The catalytic reactor achieves destruction of the organics by the process of oxidation. The catalyst oxidizes the hydrocarbons to carbon dioxide and water vapor at significantly lower temperatures than thermal oxidizers. How the Catalytic Oxidizer Works The Catalytic Oxidizer is designed based on volume of airflow, organic vapor concentrations and desired destruction efficiency. During operation, VOC-laden air is drawn into the system fan and is discharged into the system's heat exchanger. The air is preheated through the tube side of the heat exchanger and then passes the burner, where the contaminated air is raised to the operating temperature. As the VOC-laden air passes through the catalyst, an exothermic (heat releasing) reaction takes place. The VOCs in the air stream are converted to carbon dioxide and water vapor. The hot, purified air then passes on the shell side of the heat exchanger where the energy released by the reaction is used to preheat the incoming air. The heat exchanger minimizes the system's fuel consumption with the system being self-sustaining at low LEL levels. Finally, the contaminant-free air is exhausted into the atmosphere. Anguil's Cost Effective Design
Anguil strives to provide innovative pollution control technology including process analysis, engineering, equipment manufacturing, installation and post-sale 24-hour service. System Components Catalytic Oxidizer Systems include a heat exchanger, modulating burner, fuel train, catalyst bed, fan, motor, fresh air start-up valves, flanged inlet and outlet, system controls, temperature recorder, first-out shutdown detector and exhaust stack. The system has a weather-proof, insulated steel outer skin with access doors that allow service to all internal parts. Catalytic Recuperative Oxidizer System Schematic Options
Safety Shutdowns The system will shut down safely and automatically if any of the following occur:
The first-out shutdown detector will indicate the cause of a Catalytic Oxidizer shutdown.
|
|||||||||||||||||||||||||||||||||||||||||||||
 |
|
|
|
|
|
The Catalytic Oxidizer is designed as part of Anguil's broad line
of technologically advanced, yet user-friendly, air pollution control
products. The Anguil product line includes over 1,600 installations
of Recuperative and Regenerative Catalytic and Thermal Oxidizers ranging
in size from 100 SCFM to 100,000 SCFM (150-150,000 NM3/hr), Ceramic
Filter Systems, Soil Remediation Equipment, Rotor Concentrators and
Scrubbers. Each product line represents value-engineered systems with
emphasis on cost minimization. All systems are designed for optimum
performance and trouble-free operation.