|
|
|
| |
|
Thermal Recuperative Oxidizer
The Anguil Thermal Oxidizer destroys toxic Volatile Organic Compounds (VOCs) that are discharged in industrial process exhausts. The Thermal Oxidizer achieves destruction of the organics by the process of combustion. All hydrocarbons are oxidized to carbon dioxide and water vapor, due to the proper mix of temperature, residence time and turbulence within the reactor chamber. How the Thermal Recuperative Oxidizer Works The Thermal Oxidizer is designed based on volume of airflow, organic vapor concentrations and desired destruction efficiency. During operation, VOC-laden air is drawn into the system fan and is discharged into the system's heat exchanger. The air is preheated through the tube side of the heat exchanger and then passes the burner, where the contaminated air is raised to the thermal oxidation temperature (1,200-1,800ºF or 650-1,000ºC). When the VOC-laden air is raised to the thermal oxidation temperature for the specified residence time (0.5 - 2.0 seconds), an exothermic reaction takes place. The VOCs in the air stream are converted to carbon dioxide and water vapor. The hot, purified air then passes on the shell side of the heat exchanger where the energy released by the reaction is used to preheat the incoming air. The heat exchanger minimizes the system's fuel consumption with the system being self-sustaining at moderate LEL levels. Finally, the contaminant-free air is exhausted into the atmosphere. Anguil's Cost Effective Design
Anguil strives to provide innovative pollution control technology including process analysis, engineering, equipment manufacturing, installation and post-sale 24-hour service. System Components Thermal Oxidizer Systems include a system fan, motor, heat exchanger, modulating burner, fuel train, ceramic-lined reactor, fresh air start-up valves, system controls, temperature recorder, first-out shutdown detector and exhaust stack. The system has a weatherproof, ceramic-lined steel outer skin with access doors that allow service to all internal parts. Thermal Recuperative Oxidizer System Schematic Options
Safety Shutdowns The system will shut down safely and automatically if any of the following occur:
The first-out shutdown detector will indicate the cause of a Thermal Oxidizer shutdown.
|
|||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
|
|
|
|
The Thermal Oxidizer System is designed as part of Anguil's broad
line of technologically advanced, yet user-friendly, air pollution
control products. The Anguil product line includes over 1,600 installations
of Recuperative and Regenerative Catalytic and Thermal Oxidizers ranging
in size from 100 to 100,000 SCFM (150 to 150,000 NM3/hr), Ceramic
Filter Systems, Soil Remediation Equipment, Rotor Concentrators and
Scrubbers. Each product line represents value-engineered systems with
emphasis on cost minimization. All systems are designed for optimum
performance and trouble-free operation.