Chlorinated Emission Treatment & Control Systems

Aftermarket Services for this product

Anguil has over three decades of experience servicing thousands of oxidizers of all makes and models!


Submit Project Specs

To submit project details for equipment recommendations and proposals, please choose either our:


Energy Recovery

Water Treatment

Chlorinated Emission Control System

  • Photos

Anguil's Chlorinated Oxidizers destroy halogenated organic acids and mixed organic vapor contaminants that are discharged from a variety of industrial process streams. We have also developed several destruction devices specifically for soil and groundwater remediation sites contaminated with chlorinated compounds such as carbon tetrachloride, tetrachloroethene (PCE) or trichloroethene (TCE). 

How the Chlorinated Oxidizer Works

The Chlorinated model is selected based on volume of airflow, contaminant type and desired destruction efficiency. Similar to a standard thermal or catalytic oxidizer, destruction of VOC-laden air is achieved through high temperature combustion with heat recovery to reduce operating costs by preheating incoming contaminants.  When halogenated hydrocarbons such as chlorine, bromine and fluorine are present in the process gas, Anguil makes special considerations to design an emission control system that will not only protect against corrosion but also scrub the acids produced during oxidation.

Design Considerations:

  • Temperature and residence times are increased to ensure halogen destruction efficiency
  • Induced draft fan design is used to eliminate acid gas escape
  • Critical components are upgraded to higher alloys to withstand the corrosive emissions
  • External shrouds are added or vinyl ester coatings applied to prevent acid corrosion of the external shell
  • When special coatings are applied they are subject to pre and post application inspections by a third party
  • Acid Gas Scrubbers are incorporated into the system for further treatment of acidic emissions
  • FRP (Fiberglass Reinforced Plastics) fan and ductwork are used when necessary

Available Options:

  • Thermal, Catalytic or Direct-Fired oxidizers for chlorinated emission control
    Complete "turnkey" packages
  • Supplemental Fuel Injection (SFI) for increased fuel efficiency and ultra low NOX emissions
  • Hot Side Bypass for high loading conditions
  • Skid or remote mounted panels and enclosure rooms available for system controls
  • Custom oxidizer design options to meet space restrictions


  • Completely shop assembled, pre-wired and tested prior to shipment
  • Skid mounted designs available for airflows up to 30,000 SCFM and single unit systems up to 75,000 SCFM
  • Up to 25% Lower Explosive Limits (LEL) RTO operation while self-sustaining as low as 3% LEL, reducing the need for auxiliary fuel
  • Gas trains are designed to meet FM Global or any international certifications such as CSA, EN, TSSA, CGA and ATEX
  • Low NOX  burner designed to maintain temperature during full flow, no VOC process conditions
  • Programmable Logic Controller (PLC) based controls with digital data recorder remote telemetry
  • Variable Frequency Drive (VFD) allows for high volumetric turn-down during idle or low process conditions
  • Bake-out feature to remove organic particulate build up
  • Hinged access doors for ease of maintenance

Anguil's Cost Effective Design

These thermal and catalytic oxidizers for chlorinated emission streams are designed as part of Anguil's broad line of technologically advanced, yet user-friendly, air pollution control products.  Anguil's experience includes over 35 years of Regenerative, Recuperative, Catalytic and Direct-Fired oxidizer manufacturing, ranging in size from 100 to 500,000 SCFM (150-800,000 Nm3/hr).  Each product line represents value-engineered systems with emphasis on both capital and operating cost minimization.  All systems are designed for seamless integration into the process, optimal performance and trouble-free operation.  Anguil strives to provide innovative pollution control technology including process analysis, engineering, equipment manufacturing, installation and post-sale 24-hour service.

The Anguil Advantage:

  • 99%+ Destruction Rate Efficiency
  • Regulatory Compliance Guaranteed
  • System flexibility addresses a wide range of process conditions and easily controls multiple sources
  • Low pressure drop reduces electrical consumption
  • Competitive capital equipment cost
  • Rapid installation time on most systems
  • Small equipment footprint

Do you have a project where we can be of assistance?  Contact Anguil or complete our Oxidizer Application Data Sheet for equipment recommendations, pricing and availability.